LIN'S CHINA

Observed wood planks in walk in cooler used to hold the metal racks off the floor. Advised PIC all materials shall be smooth and easy cleanable. C/A:511-6-1.05(1)(a) - Materials, General Requirements (P, C) (1) Materials. (a) General Requirements. Utensils and food-contact surfaces of equipment shall be made of materials that do not allow the migration of deleterious substances or impart colors, odors, or tastes to food and under normal use conditions, and shall be: P safe P, durable, corrosion-resistant, and nonabsorbent. In addition, materials shall be sufficient in weight and thickness to withstand repeated warewashing and shall be finished to have a smooth, easily cleanable surface. Materials shall be resistant to pitting, chipping, crazing, scratching, scoring, distortion and decomposition.

Observed grease hood unclean with grease build up on the edges of hood not in direct contact with TCS foods/ready to eat foods. Advised to have deep cleaned and increase cleaning frequency. C/A:511-6-1.05(7)(d) - Nonfood-Contact Surfaces (C) (d) Nonfood-Contact Surfaces. Nonfood-contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil residues.

Observed Cl sanitizer reading 200+ ppm. C/A: 511-6-1.07(6)(g) - Chemical Sanitizers, Criteria (P) (g) Chemical Sanitizers, Criteria. Chemical sanitizers, including chemical sanitizing solutions generated on-site, and other chemical antimicrobials applied to food-contact surfaces shall: 1. Meet requirements specified in 40 CFR 180.940 Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (Food-contact surface sanitizing solutions) P, or 2. Meet the requirements as specified in 40 CFR 180.2020 Pesticide Chemicals Not Requiring a Tolerance or Exemption from Tolerance-Non-food determinations. COS: Sanitizer was remade to reading 100 ppm Cl. Advised PIC to use test strips when making sanitizer bucket.

Observed single use containers being reused for storing sauces, raw shrimp, sprouts. C/A:511-6-1.05(6)(r) - Single-Service/Single-Use Articles, Use Limitations (C) (r) Single-Service and Single-Use Articles, Use Limitation. 1. Single-service and single-use articles may not be reused. Advised to purchase food grade storage containers.

Observed floors under equipment unclean to sight. C/A: 511-6-1.07(5)(a),(b) - Good Repair, physical facilities maintained; Cleaning, Frequency & Restrictions, cleaned often enough to keep them clean (C) (5) Maintenance and Operation. (a) Good Repair. All physical facilities shall be maintained in good repair. (b) Cleaning, Frequency and Restrictions. 1. The physical facilities shall be cleaned as often as necessary to keep them clean and by methods that prevent contamination of food products. 2. Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of food is exposed, such as after closing. Advised to have deep cleaned and increase cleaning frequency.

Observed dead roach in main lobby. Corrective Action: 511-6-1.07(5)(l) - Removing Dead or Trapped Birds, Insects, Rodents, and Other Pest (C) (l) Removing Dead or Trapped Birds, Insects, Rodents, and Other Pests. Dead or trapped birds, insects, rodents, and other pests shall be removed from control devices and the premises at a frequency that prevents their accumulation, decomposition, or the attraction of pests. Corrected onsite: Dead roach was removed from lobby and employee washed hands before returning to work. Pest control was called while inspector was onsite.

Observed the floors inside that walk in freezer unclean to sight and touch. Corrective Action: 511-6-1.05(7)(d) - Nonfood-Contact Surfaces (C) (d) Nonfood-Contact Surfaces. Nonfood-contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil residues. Advised to have deep cleaned and increase cleaning frequency.

Observed Cl sanitizer reading 200+ ppm. Corrective Action: 511-6-1.07(6)(g) - Chemical Sanitizers, Criteria (P) (g) Chemical Sanitizers, Criteria. Chemical sanitizers, including chemical sanitizing solutions generated on-site, and other chemical antimicrobials applied to food-contact surfaces shall: 1. Meet requirements specified in 40 CFR 180.940 Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (Food-contact surface sanitizing solutions) P, or 2. Meet the requirements as specified in 40 CFR 180.2020 Pesticide Chemicals Not Requiring a Tolerance or Exemption from Tolerance-Non-food determinations. Corrected on site: Sanitizer was remade to reading 100 ppm Cl. Advised PIC to use test strips when making sanitizer bucket.

Observed rubber gaskets on prep top cooler doors unclean with black substance build up. Corrective Action: 511-6-1.05(7)(a)2,3 - Equipment, Food/Nonfood-Contact Surfaces, and Utensils, food-contact surfaces of cooking equipment & nonfood-contact surfaces free of accumulations (C) 2. The food-contact surfaces of cooking equipment and pans shall be kept free of encrusted grease deposits and other soil accumulations. 3. Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. Advised to have deep cleaned.

Observed large mixer with debris build up in direct contact with food contact surface. .COS-Mixer was cleaned and sanitized by PIC. Advised to increase cleaning frequency.

Observed ceiling tiles missing in main kitchen. Advised to have repaired.